RationalDMIS2023多个平面最佳拟合平面2023

RationalDMIS2023最佳拟合功能，支持多个共面的测量小面拟合成一个大面的功能。

拟合构造支持平面元素，使用平面的重心参与拟合运算。

MODE/PROG,MAN
F(PLN1)=FEAT/PLANE,CART,-14.0573,14.1101,0.0000,0.0000,0.0000,1.0000
$$ Measurement points are created through nominal points
MEAS/PLANE, F(PLN1), 4
  PTMEAS/CART, -10.6909, 18.3704, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, -10.6195, 13.4234, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, -19.9150,  8.0383, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, -15.0038, 16.6086, 0.0000, 0.0000, 0.0000, 1.0000
ENDMES
F(PLN2)=FEAT/PLANE,CART,-13.6117,-14.5297,0.0000,0.0000,0.0000,1.0000
$$ Measurement points are created through nominal points
MEAS/PLANE, F(PLN2), 4
  PTMEAS/CART, -17.1809,  -8.8350, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, -19.2239, -12.6603, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, -10.5787, -20.4619, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  -7.4635, -16.1616, 0.0000, 0.0000, 0.0000, 1.0000
ENDMES
F(PLN3)=FEAT/PLANE,CART,11.3568,-15.0287,0.0000,0.0000,0.0000,1.0000
$$ Measurement points are created through nominal points
MEAS/PLANE, F(PLN3), 4
  PTMEAS/CART,  7.1587, -15.8342, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  7.9613, -21.7076, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 15.0977, -14.2175, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 15.2093,  -8.3556, 0.0000, 0.0000, 0.0000, 1.0000
ENDMES
F(PLN4)=FEAT/PLANE,CART,13.9284,12.1984,0.0000,0.0000,0.0000,1.0000
$$ Measurement points are created through nominal points
MEAS/PLANE, F(PLN4), 4
  PTMEAS/CART, 19.4894,  8.9088, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 16.3144,  5.9331, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 11.7728, 13.3708, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  8.1369, 20.5809, 0.0000, 0.0000, 0.0000, 1.0000
ENDMES
F(PLN_BF1)=FEAT/PLANE,CART,-1.4251,-0.6854,0.0000,0.0000,0.0000,1.0000
CONST/PLANE,F(PLN_BF1),BF,FA(PLN1),FA(PLN2),FA(PLN3),FA(PLN4)