华为设备配置使用静态端口实现基于VLAN的二层组播

1. 创建VLAN，配置接口加入VLAN

[LSW1]vlan batch 10

[LSW1-GigabitEthernet0/0/1]port link-type hybrid  

[LSW1-GigabitEthernet0/0/1]port hybrid untagged vlan 10

[LSW1-GigabitEthernet0/0/1]port hybrid pvid vlan 10

[LSW1-GigabitEthernet0/0/2]port link-type hybrid  

[LSW1-GigabitEthernet0/0/2]port hybrid untagged vlan 10

[LSW1-GigabitEthernet0/0/2]port hybrid pvid vlan 10

[LSW1-GigabitEthernet0/0/5]port link-type hybrid  

[LSW1-GigabitEthernet0/0/5]port hybrid pvid vlan 10

[LSW1-GigabitEthernet0/0/5]port hybrid untagged vlan 10

2. 使能IGMP Snooping功能

[LSW1]igmp-snooping enable

[LSW1]vlan 10

[LSW1-vlan10]igmp-snooping enable

3. 配置静态路由器端口

[LSW1-GigabitEthernet0/0/5]igmp-snooping static-router-port vlan 10

4. 配置静态成员端口

[LSW1-GigabitEthernet0/0/1]l2-multicast static-group group-address 225.1.1.1 to 225.1.1.2 vlan 10

[LSW1-GigabitEthernet0/0/2]l2-multicast static-group group-address 225.1.1.3 to 225.1.1.4 vlan 10

5. 配置IP地址

[AR1-GigabitEthernet0/0/1]ip add 10.1.1.1 24

[AR1-GigabitEthernet0/0/0]ip add 10.1.2.1 24

6. 配置单播路由协议-OSPF

[AR1]ospf 1

[AR1-ospf-1] area 0

[AR1-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255

[AR1-ospf-1-area-0.0.0.0]network 10.1.2.0 0.0.0.255

7. 使能组播路由功能，在接口上使能PIM-SM功能，在主机侧接口上使能IGMP功能

[AR1]multicast routing-enable  

[AR1-GigabitEthernet0/0/1]pim sm

[AR1-GigabitEthernet0/0/0]pim sm  

[AR1-GigabitEthernet0/0/0]igmp enable

8. 验证配置