建议配置之前先把配置线拆掉
然后开始配置
[H3C]irf member 1 priority 32
[H3C]interface range t1/0/50 t t1/0/51
[H3C-if-range]shutdown
[H3C]irf-port 1/1
[H3C-irf-port1/1]port group in t 1/0/50
[H3C-irf-port1/1]port group in t 1/0/51
[H3C]irf-port-configuration active
[H3C]interface range t1/0/50 to t1/0/51
[H3C-if-range]undo shutdown
然后记得保存
sava
然后到第二台
[H3C]irf member 1 renumber 2
Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y
然后重启一下reboot
[H3C]interface range t2/0/50 to t 2/0/51
[H3C-if-range]shutdown
[H3C]irf member 2 priority 1
[H3C]irf-port 2/2
[H3C-irf-port2/2]po g in t 2/0/50
[H3C-irf-port2/2]po g in t 2/0/51
[H3C]irf-port-configuration active
[H3C]interface range T 2/0/50 to T 2/0/51
[H3C-if-range]undo shutdown
记得保存sava
然后可以先看一下状态
然后接线等个一分钟
然后完成了
