###############################################################################
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved. ##
## ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
## ##
## IMPORTANT NOTE: This file contains plain text passwords and ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation. ##
## ##
###############################################################################
###############################################################################
## ##
## Instructions to fill this response file ##
## To install and configure 'Grid Infrastructure for Cluster' ##
## - Fill out sections A,B,C,D,E,F and G ##
## - Fill out section G if OCR and voting disk should be placed on ASM ##
## ##
## To install and configure 'Grid Infrastructure for Standalone server' ##
## - Fill out sections A,B and G ##
## ##
## To install software for 'Grid Infrastructure' ##
## - Fill out sections A,B and C ##
## ##
## To upgrade clusterware and/or Automatic storage management of earlier ##
## releases ##
## - Fill out sections A,B,C,D and H ##
## ##
###############################################################################
#------------------------------------------------------------------------------
# Do not change the following system generated value.
#------------------------------------------------------------------------------
oracle.install.responseFileVersion=/oracle/install/rspfmt_crsinstall_response_schema_v11_2_0
###############################################################################
# #
# SECTION A - BASIC #
# #
###############################################################################
#-------------------------------------------------------------------------------
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames
# and network interfaces)
#-------------------------------------------------------------------------------
ORACLE_HOSTNAME=orclx1
#-------------------------------------------------------------------------------
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on
# Windows based Operating System.
#-------------------------------------------------------------------------------
INVENTORY_LOCATION=/u01/app/oraInventory
#-------------------------------------------------------------------------------
# Specify the languages in which the components will be installed.
#
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
#
# all_langs : All languages
#
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
#
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
#-------------------------------------------------------------------------------
SELECTED_LANGUAGES=en,zh_CN
#-------------------------------------------------------------------------------
# Specify the installation option.
# Allowed values: CRS_CONFIG or HA_CONFIG or UPGRADE or CRS_SWONLY
# - CRS_CONFIG : To configure Grid Infrastructure for cluster
# - HA_CONFIG : To configure Grid Infrastructure for stand alone server
# - UPGRADE : To upgrade clusterware software of earlier release
# - CRS_SWONLY : To install clusterware files only (can be configured for cluster
# or stand alone server later)
#-------------------------------------------------------------------------------
oracle.install.option=CRS_CONFIG
#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Base.
#-------------------------------------------------------------------------------
ORACLE_BASE=/u01/app/grid
#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Home.
#-------------------------------------------------------------------------------
ORACLE_HOME=/u01/app/11.2.0.0/grid
################################################################################
# #
# SECTION B - GROUPS #
# #
# The following three groups need to be assigned for all GI installations. #
# OSDBA and OSOPER can be the same or different. OSASM must be different #
# than the other two. #
# The value to be specified for OSDBA, OSOPER and OSASM group is only for #
# Unix based Operating System. #
# #
################################################################################
#-------------------------------------------------------------------------------
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
#-------------------------------------------------------------------------------
oracle.install.asm.OSDBA=asmdba
#-------------------------------------------------------------------------------
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
#-------------------------------------------------------------------------------
oracle.install.asm.OSOPER=asmoper
#-------------------------------------------------------------------------------
# The OSASM_GROUP is the OS group which is to be granted OSASM privileges. This
# must be different than the previous two.
#-------------------------------------------------------------------------------
oracle.install.asm.OSASM=asmadmin
################################################################################
# #
# SECTION C - SCAN #
# #
################################################################################
#-------------------------------------------------------------------------------
# Specify a name for SCAN
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.scanName=orclx-scan
#-------------------------------------------------------------------------------
# Specify a unused port number for SCAN service
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.scanPort=1521
################################################################################
# #
# SECTION D - CLUSTER & GNS #
# #
################################################################################
#-------------------------------------------------------------------------------
# Specify a name for the Cluster you are creating.
#
# The maximum length allowed for clustername is 15 characters. The name can be
# any combination of lower and uppercase alphabets (A - Z), (0 - 9), hyphen(-)
# and underscore(_).
#-------------------------------------------------------------------------------
oracle.install.crs.config.clusterName=orclx-cluster
#-------------------------------------------------------------------------------
# Specify 'true' if you would like to configure Grid Naming Service(GNS), else
# specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.configureGNS=false
#-------------------------------------------------------------------------------
# Applicable only if you choose to configure GNS
# Specify the GNS subdomain and an unused virtual hostname for GNS service
# Additionally you may also specify if VIPs have to be autoconfigured
#
# Value for oracle.install.crs.config.autoConfigureClusterNodeVIP should be true
# if GNS is being configured(oracle.install.crs.config.gpnp.configureGNS), false
# otherwise.
#-------------------------------------------------------------------------------
oracle.install.crs.config.gpnp.gnsSubDomain=
oracle.install.crs.config.gpnp.gnsVIPAddress=
oracle.install.crs.config.autoConfigureClusterNodeVIP=
#-------------------------------------------------------------------------------
# Specify a list of public node names, and virtual hostnames that have to be
# part of the cluster.
#
# The list should a comma-separated list of nodes. Each entry in the list
# should be a colon-separated string that contains 2 fields.
#
# The fields should be ordered as follows:
# 1. The first field is for public node name.
# 2. The second field is for virtual host name
# (specify as AUTO if you have chosen 'auto configure for VIP'
# i.e. autoConfigureClusterNodeVIP=true)
#
# Example: oracle.install.crs.config.clusterNodes=node1:node1-vip,node2:node2-vip
#-------------------------------------------------------------------------------
oracle.install.crs.config.clusterNodes=orclx1:orclx1-vip,orclx2:orclx2-vip
#-------------------------------------------------------------------------------
# The value should be a comma separated strings where each string is as shown below
# InterfaceName:SubnetAddress:InterfaceType
# where InterfaceType can be either "1", "2", or "3"
# (1 indicates public, 2 indicates private, and 3 indicates the interface is not used)
#
# For example: eth0:140.87.24.0:1,eth1:10.2.1.0:2,eth2:140.87.52.0:3
#
#-------------------------------------------------------------------------------
oracle.install.crs.config.networkInterfaceList=eth0:10.2.xx.0:1,eth1:172.xx.x.0:2
################################################################################
# #
# SECTION E - STORAGE #
# #
################################################################################
#-------------------------------------------------------------------------------
# Specify the type of storage to use for Oracle Cluster Registry(OCR) and Voting
# Disks files
# - ASM_STORAGE
# - FILE_SYSTEM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.crs.config.storageOption=ASM_STORAGE
#-------------------------------------------------------------------------------
# THIS PROPERTY NEEDS TO BE FILLED ONLY IN CASE OF WINDOWS INSTALL.
# Specify a comma separated list of strings where each string is as shown below:
# Disk Number:Partition Number:Drive Letter:Format Option
# The Disk Number and Partition Number should refer to the location which has to
# be formatted. The Drive Letter should refer to the drive letter that has to be
# assigned. "Format Option" can be either of the following -
# - SOFTWARE : Format to place software binaries.
# - DATA : Format to place the OCR/VDSK files.
#
# For example: 1:2:P:DATA,1:3:Q:SOFTWARE,1:4:R:DATA,1:5:S:DATA
#
#-------------------------------------------------------------------------------
oracle.install.crs.config.sharedFileSystemStorage.diskDriveMapping=
#-------------------------------------------------------------------------------
# These properties are applicable only if FILE_SYSTEM_STORAGE is chosen for
# storing OCR and voting disk
# Specify the location(s) and redundancy for OCR and voting disks
# In case of windows, mention the drive location that is specified to be
# formatted for DATA in the above property.
# Multiple locations can be specified, separated by commas
# Redundancy can be one of these:
# EXTERNAL - one(1) location should be specified for OCR and voting disk
# NORMAL - three(3) locations should be specified for OCR and voting disk
# Example:
# For Unix based Operating System:
# oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=/oradbocfs/storage/vdsk1,/oradbocfs/storage/vdsk2,/oradbocfs/storage/vdsk3
# oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=/oradbocfs/storage/ocr1,/oradbocfs/storage/ocr2,/oradbocfs/storage/ocr3
# For Windows based Operating System:
# oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=P:\vdsk1,R:\vdsk2,S:\vdsk3
# oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=P:\ocr1,R:\ocr2,S:\ocr3
#-------------------------------------------------------------------------------
oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=
oracle.install.crs.config.sharedFileSystemStorage.votingDiskRedundancy=NORMAL
oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=
oracle.install.crs.config.sharedFileSystemStorage.ocrRedundancy=NORMAL
################################################################################
# #
# SECTION F - IPMI #
# #
################################################################################
#-------------------------------------------------------------------------------
# Specify 'true' if you would like to configure Intelligent Power Management interface
# (IPMI), else specify 'false'
#-------------------------------------------------------------------------------
oracle.install.crs.config.useIPMI=false
#-------------------------------------------------------------------------------
# Applicable only if you choose to configure IPMI
# i.e. oracle.install.crs.config.useIPMI=true
# Specify the username and password for using IPMI service
#-------------------------------------------------------------------------------
oracle.install.crs.config.ipmi.bmcUsername=
oracle.install.crs.config.ipmi.bmcPassword=
################################################################################
# #
# SECTION G - ASM #
# #
################################################################################
#-------------------------------------------------------------------------------
# Specify a password for SYSASM user of the ASM instance
#-------------------------------------------------------------------------------
oracle.install.asm.SYSASMPassword=oracle11g
#-------------------------------------------------------------------------------
# The ASM DiskGroup
#
# Example: oracle.install.asm.diskGroup.name=data
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.name=OCR
#-------------------------------------------------------------------------------
# Redundancy level to be used by ASM.
# It can be one of the following
# - NORMAL
# - HIGH
# - EXTERNAL
# Example: oracle.install.asm.diskGroup.redundancy=NORMAL
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.redundancy=NORMAL
#-------------------------------------------------------------------------------
# Allocation unit size to be used by ASM.
# It can be one of the following values
# - 1
# - 2
# - 4
# - 8
# - 16
# - 32
# - 64
# Example: oracle.install.asm.diskGroup.AUSize=4
# size unit is MB
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.AUSize=4
#-------------------------------------------------------------------------------
# List of disks to create a ASM DiskGroup
#
# Example:
# For Unix based Operating System:
# oracle.install.asm.diskGroup.disks=/oracle/asm/disk1,/oracle/asm/disk2
# For Windows based Operating System:
# oracle.install.asm.diskGroup.disks=\\.\ORCLDISKDATA0,\\.\ORCLDISKDATA1
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.disks=/dev/mapper/asm1,/dev/mapper/asm2,/dev/mapper/asm3
#-------------------------------------------------------------------------------
# The disk discovery string to be used to discover the disks used create a ASM DiskGroup
#
# Example:
# For Unix based Operating System:
# oracle.install.asm.diskGroup.diskDiscoveryString=/oracle/asm/*
# For Windows based Operating System:
# oracle.install.asm.diskGroup.diskDiscoveryString=\\.\ORCLDISK*
#
#-------------------------------------------------------------------------------
oracle.install.asm.diskGroup.diskDiscoveryString=/dev/mapper/asm*
#-------------------------------------------------------------------------------
# oracle.install.asm.monitorPassword=password
#-------------------------------------------------------------------------------
oracle.install.asm.monitorPassword=oracle11g
################################################################################
# #
# SECTION H - UPGRADE #
# #
################################################################################
#-------------------------------------------------------------------------------
# Specify nodes for Upgrade.
# For upgrade on Windows, installer overrides the value of this parameter to include
# all the nodes of the cluster. However, the stack is upgraded one node at a time.
# Hence, this parameter may be left blank for Windows.
# Example: oracle.install.crs.upgrade.clusterNodes=node1,node2
#-------------------------------------------------------------------------------
oracle.install.crs.upgrade.clusterNodes=
#-------------------------------------------------------------------------------
# For RAC-ASM only. oracle.install.asm.upgradeASM=true/false
# Value should be 'true' while upgrading Cluster ASM of version 11gR2(11.2.0.1.0) and above
#-------------------------------------------------------------------------------
oracle.install.asm.upgradeASM=false
#------------------------------------------------------------------------------
# Specify the auto-updates option. It can be one of the following:
# - MYORACLESUPPORT_DOWNLOAD
# - OFFLINE_UPDATES
# - SKIP_UPDATES
#------------------------------------------------------------------------------
oracle.installer.autoupdates.option=
#------------------------------------------------------------------------------
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
#------------------------------------------------------------------------------
oracle.installer.autoupdates.downloadUpdatesLoc=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=
#------------------------------------------------------------------------------
# Specify the Proxy server name. Length should be greater than zero.
#
# Example : PROXY_HOST=proxy.domain.com
#------------------------------------------------------------------------------
PROXY_HOST=
#------------------------------------------------------------------------------
# Specify the proxy port number. Should be Numeric and at least 2 chars.
#
# Example : PROXY_PORT=25
#------------------------------------------------------------------------------
PROXY_PORT=
#------------------------------------------------------------------------------
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_USER=username
#------------------------------------------------------------------------------
PROXY_USER=
#------------------------------------------------------------------------------
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_PWD=password
#------------------------------------------------------------------------------
PROXY_PWD=
#------------------------------------------------------------------------------
# Specify the proxy realm.
#
# Example : PROXY_REALM=metalink
#------------------------------------------------------------------------------
PROXY_REALM=
./runInstaller -silent -ignoreSysPrereqs -ignorePrereq -showProgress -responseFile /tmp/grid_install.rsp
opatch
asmcmd / lsattr -G OCR -l
create diskgroup DATA EXTERNAL REDUNDANCY DISK '/dev/mapper/asm5' attribute 'compatible.rdbms'='10.1.0.0.0','compatible.asm'='11.2.0.0.0','au_size'='4M';
====
未识别为rac处理方案
vi /u01/app/oraInventory/ContentsXML/inventory.xml
<HOME NAME="Ora11g_gridinfrahome1" LOC="/u01/app/11.2.0.0/grid" TYPE="O" IDX="1" CRS="true">
=================================
oracle.install.option=INSTALL_DB_SWONLY
ORACLE_HOSTNAME=orclx1
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/u01/app/oraInventory
SELECTED_LANGUAGES=en,zh_CN
ORACLE_HOME=/u01/app/oracle/product/11.2.0.4/dbhome_1
ORACLE_BASE=/u01/app/oracle
oracle.install.db.InstallEdition=EE
oracle.install.db.EEOptionsSelection=false
oracle.install.db.optionalComponents=oracle.rdbms.partitioning:11.2.0.4.0,oracle.oraolap:11.2.0.4.0,oracle.rdbms.dm:11.2.0.4.0,oracle.rdbms.dv:11.2.0.4.0,oracle.rdbms.lbac:11.2.0.4.0,oracle.rdbms.rat:11.2.0.4.0
oracle.install.db.DBA_GROUP=dba
oracle.install.db.OPER_GROUP=dba
oracle.install.db.CLUSTER_NODES=orclx1,orclx2
oracle.install.db.config.starterdb.characterSet=AL32UTF8
oracle.install.db.config.starterdb.memoryOption=true
oracle.install.db.config.starterdb.installExampleSchemas=false
oracle.install.db.config.starterdb.enableSecuritySettings=true
oracle.install.db.config.starterdb.control=DB_CONTROL
oracle.install.db.config.starterdb.automatedBackup.enable=false
DECLINE_SECURITY_UPDATES=true
=======================
dbca -silent -createDatabase \
-characterset zhs16gbk \
-nationalcharacterset al16utf16 \
-continueOnNonFatalErrors false \
-disableSecurityConfiguration ALL \
-listeners LISTENER \
-diskGroupName 'DATA' \
-datafiledestination '+DATA' \
-emConfiguration NONE \
-gdbName orcl \
-memoryPercentage 40 \
-sid orcl \
-sysPassword oracle11g \
-systemPassword oracle11g \
-asmsnmpPassword oracle11g \
-automaticmemorymanagement false \
-totalMemory 0 \
-storageType ASM \
-sampleSchema true \
-templateName General_Purpose.dbc \
-nodeinfo orclx1,orclx2
dbca -silent \
-createDatabase \
-asmsnmpPassword asm \
-characterSet AL32UTF8 \
-continueOnNonFatalErrors false \
-datafiledestination '/oradata/xxxx' \
-emConfiguration NONE \
-gdbName xxxx \
-listeners LISTENER \
-memoryPercentage 25 \
-sid xxxx \
-sysPassword sys \
-systemPassword sys \
-storageType FS \
-sampleSchema true \
-templateName General_Purpose.dbc \
dbca -silent -createDatabase -templateName General_Purpose.dbc -gdbname orcl -sid orcl -sysPassword oracle11g -systemPassword oracle11g -datafileDestination 'DATA' -storageType ASM -asmsnmpPassword oracle11g -diskGroupName 'DATA' -responseFile NO_VALUE -characterset ZHS16GBK -nationalCharacterSet AL16UTF16 -automaticMemoryManagement true -nodeinfo orclx1,orclx2
select GROUP#, THREAD# ,BYTES/1024/1024/1024 G ,STATUS ,MEMBERS from v$log order by 2;
select GROUP#, THREAD# ,BYTES/1024/1024/1024 G ,STATUS from v$standby_log;
alter database add standby logfile group 5 size 1024M;
alter database add standby logfile group 6 size 1024M;
alter database add standby logfile group 7 size 1024M;
alter database add standby logfile group 8 size 1024M;
alter database add standby logfile group 9 size 1024M;
alter database add standby logfile group 10 size 1024M;
alter database add logfile group 4 size 1024m;
alter database add logfile THREAD 1 group 4 size 1024m;
select name,db_unique_name from v$database;
alter system set LOG_ARCHIVE_CONFIG='DG_CONFIG=(xxxx, xxxxadg)';
alter system set LOG_ARCHIVE_DEST_1='LOCATION=+DATA VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=xxxx';
alter system set LOG_ARCHIVE_DEST_2='SERVICE=xxxxadg LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=xxxxadg';
alter system set LOG_ARCHIVE_DEST_STATE_1=ENABLE;
alter system set LOG_ARCHIVE_DEST_STATE_2=ENABLE;
alter system set standby_file_management=auto;
alter system set FAL_SERVER= xxxxadg;
alter system set FAL_CLIENT= xxxx; 0
点赞
收藏
分享
安装便捷操作
相关推荐
0 条评论
