0
点赞
收藏
分享

微信扫一扫

KeepAlived+Redis | 高可用 | 主从复制 | 健康检查 | 故障自动切换

云岭逸人 2022-02-14 阅读 74


本文讲解如何使用KeepAlived配合健康检查脚本来配置Redis高可用(主从数据同步,故障自动切换)。

PS:在使用前请先安装好KeepAlived Redis等相关软件,需要设置为系统服务,但不要设置成为开机启动。


​​CentOS(7.x64位) 安装Redis3.2 并设置为系统服务​​

​​CentOS7 安装Keepalived以及基本配置​​


​​CentOS7 下配置Keepalived为系统服务,开机自动启动。​​




软件环境


CentOS7  X64   |  Keepalived v1.2.22   |   redis-3.2.0



系统架构图


KeepAlived+Redis | 高可用 | 主从复制 | 健康检查 | 故障自动切换_数据


1:正常情况下VIP绑定到Redis-Master主服务器上(128),由主服务器对外提供服务,Redis-Slave(132)为备用服务器,异步备份主服务器上的数据。


2:当Redis-Master出现故障后,VIP绑定到Redis-Slave服务器上(132),这时通过脚本提升 Redis-Slave 为新的主,对外提供服务。


3:当Redis-Master服务器恢复正常后,通过脚本将它设置备用服务器,同时设置它去新的主服务器(132)上同步数据。


4:只要俩台服务器不同时宕机,即可实现Redis的高可用,故障自动切换功能。


PS:上诉架构仍然存在一些问题,就是当主服务器的缓存内容改变后,此时备份服务器还没来得急更新数据,如果在这时主服务器宕机,那么备份服务器会丢失这部分数据。


命令脚本


1:redis-to-master.sh   当Redis提升为主时执行的脚本。

#!/bin/sh
# redis-to-master.sh

rediscli="/home/redis/redis-3.2.0/src/redis-cli"

$rediscli slaveof no one

perl -pi -e 's/^slaveof.*/slaveof no one/' /home/redis/redis-3.2.0/redis.conf

echo $(date "+%Y-%m-%d %H:%M:%S") "the redis is to be the master." >> /home/redis/redis_rdb/redis-keepalived.log



rediscli="/home/redis/redis-3.2.0/src/redis-cli"   定义redis客户端的位置。

$rediscli slaveof no one  执行Redis客户端命令,设置不去任何地方同步数据(提升为主)。

perl -pi -e 's/^slaveof.*/slaveof no one/' /home/redis/redis-3.2.0/redis.conf   修改配置文件 echo $(date "+%Y-%m-%d %H:%M:%S") "the redis is to be the master." >> /home/redis/redis_rdb/redis-keepalived.log   记录日志。



2:redis-to-slave.sh  当Redis变成备时执行的脚本

#!/bin/sh
# redis-to-slave.sh

rediscli="/home/redis/redis-3.2.0/src/redis-cli"
PEER_HOST="192.168.80.132"
PEER_PORT=6379
$rediscli slaveof $PEER_HOST $PEER_PORT
perl -pi -e "s/^slaveof.*/slaveof $PEER_HOST $PEER_PORT/" /home/redis/redis-3.2.0/redis.conf

echo $(date "+%Y-%m-%d %H:%M:%S") "the redis is to be the slave." >> /home/redis/redis_rdb/redis-keepalived.log


$rediscli slaveof $PEER_HOST $PEER_PORT   执行Redis客户端命令,设置其去主服务器同步数据(变成备)。




3:redis-check.sh  KeepAlived健康检查脚本。

#!/bin/sh
# redis-check.sh

rediscli="/home/redis/redis-3.2.0/src/redis-cli"
logfile="/home/redis/redis_rdb/redis-keepalived.log"

# echo $(date "+%Y-%m-%d %H:%M:%S") keepaliced checking >> $logfile

for TRIES in `seq 1 3`
do
RESULT=`$rediscli ping`
if [ "${RESULT}" = "PONG" ]; then
exit 0
fi
echo $(date "+%Y-%m-%d %H:%M:%S") "ping failed ${TRIES}" >> $logfile
sleep 1
done
echo $(date "+%Y-%m-%d %H:%M:%S") "redis server was down. shutdown keepalived." >> $logfile
systemctl stop keepalived.service
exit 1


for TRIES in `seq 1 3`  循环3次


RESULT=`$rediscli ping`   执行客户端命令Ping if [ "${RESULT}" = "PONG" ]; then   exit 0   如果返回正常值,则退出脚本。

否则记录日志,暂停1秒,等3次循环结束则 结束keepalived服务 systemctl stop keepalived.service

PS:当停掉主服务器(128)上的KeepAlived后,VIP会票到备份服务器(132)上面,同时出发脚本提成(132)上面的Redis为主。



KeepAlived配置文件



主服务器配置:

! Configuration File for keepalived

global_defs {
notification_email {
root@localhost
}
notification_email_from root@localhost
smtp_server localhost
smtp_connect_timeout 30
router_id NodeA
}


vrrp_instance VI_1 {
state BACKUP
interface eno16777736
virtual_router_id 51
priority 100
nopreempt
advert_int 5
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.80.120
}

notify_master /home/redis/redis-shell/redis-to-master.sh
notify_backup /home/redis/redis-shell/redis-to-slave.sh
#notify_fault /home/keepshell/notify_fault.sh
#notify_stop /home/keepshell/notify_stop.sh
}

virtual_server 127.0.0.1 16379 {
delay_loop 5
lb_algo rr
real_server 127.0.0.1 6379 {
MISC_CHECK {
misc_path "/home/redis/redis-shell/redis-check.sh"
misc_timeout 30
}
}
}




备服务器配置: 只贴出不同之处。


router_id  NodeB (名字不同)

priority 90   (权重低一些)。

PS: nopreempt:不抢占VIP    state BACKUP(全不都为BACKUP模式)  需要注意无论主备服务器都需要设置为BACKUP,与以往KeepAlived的配置不同,其目的就是防止主服务器恢复后重新抢回VIP,导致Redis切换从而影响稳定。


========================================================================== notify_master /home/redis/redis-shell/redis-to-master.sh

当KeepAlived提升为主时执行的脚本,设置Redis变成主。


notify_backup /home/redis/redis-shell/redis-to-slave.sh

当KeepAlived变成Backup时执行的脚本,设置Redis变成备,并且去主同步数据。

misc_path "/home/redis/redis-shell/redis-check.sh" 

健康检查脚本,默认执行间隔时间5秒,脚本中如果连续3次ping redis失败,则停止KeepAlived服务。



系统测试




1:首先启动主服务器的redis与keepalived


systemctl start redis.service

systemctl status keepalived.service


启动后观察日志: cat /home/redis/redis_rdb/redis-keepalived.log 

2016-09-09 17:20:00 the redis is to be the slave.
2016-09-09 17:20:19 the redis is to be the master.

可以看到先执行了 notify_backup  这是因为主服务器上的KeepAlived也设置成了BACKUP模式,keep启动后会先成为BACKUP。然后由于只有它自己,所以它接下来会接管VIP,变成Master。然后执行notify_master 



这个时候主服务器上的Redis与Keep就正常了,通过客户端插入一些值,怎么插入就不做介绍了 可以看到值已经插入进去了。

KeepAlived+Redis | 高可用 | 主从复制 | 健康检查 | 故障自动切换_redis_02




2:启动备服务器的Redis与KeepAlived。


systemctl start redis.service

systemctl start keepalived.service


查看日志:cat /home/redis/redis_rdb/redis-keepalived.log

2016-09-09 17:28:11 the redis is to be the slave.

可以看到备服务器启动后KeepAlived执行了 notify_backup  设置redis为备,同时去主服务器同步数据。


KeepAlived+Redis | 高可用 | 主从复制 | 健康检查 | 故障自动切换_服务器_03



3:测试数据同步与客户端连接。


1、可以在主服务器写入数据,然后去备服务器查看数据是否同步,这里就不做截图演示了。 2、写一个客户端去连接VIP上的Redis读取数据。


package com;

import java.util.ArrayList;
import java.util.HashSet;
import java.util.List;
import java.util.Random;
import java.util.Set;
import java.util.concurrent.LinkedBlockingQueue;
import java.util.concurrent.ThreadPoolExecutor;
import java.util.concurrent.TimeUnit;

import redis.clients.jedis.HostAndPort;
import redis.clients.jedis.Jedis;
import redis.clients.jedis.JedisCluster;
import redis.clients.jedis.JedisPool;
import redis.clients.jedis.JedisPoolConfig;
import redis.clients.jedis.JedisShardInfo;
import redis.clients.jedis.ShardedJedis;
import redis.clients.jedis.ShardedJedisPool;
import redis.clients.util.ClusterNodeInformationParser;

public class RedisDemo {

public static void main(String[] args) throws Exception {
JedisPoolConfig cfg = new JedisPoolConfig();

final JedisPool pool = new JedisPool(cfg, "192.168.80.120", 6379, 8000);
ThreadPoolExecutor executor = new ThreadPoolExecutor(10, 10, 0,
TimeUnit.SECONDS, new LinkedBlockingQueue<Runnable>());


for (int i = 0; i < 1000; i++) {
Jedis jedis = null;

try {
jedis = pool.getResource();
System.out.println(jedis.keys("*"));
} catch (Exception e) {
e.printStackTrace();
} finally {
if (jedis != null) {
jedis.close();
}
}

Thread.sleep(2000);
}

pool.destroy();
}

}


4:模拟服务器异常。


1、首先停掉主服务器上的redis ,查看日志,看到keep也已经被停止了,这时VIP会漂到备机上。

2016-09-09 17:20:00 the redis is to be the slave.
2016-09-09 17:20:19 the redis is to be the master.
2016-09-09 17:34:14 ping failed 1
2016-09-09 17:34:15 ping failed 2
2016-09-09 17:34:16 ping failed 3
2016-09-09 17:34:17 redis server was down. shutdown keepalived.



2、查看备机的日志,看到备机已经提升为主,客户端连接VIP仍然可用。

2016-09-09 17:28:11 the redis is to be the slave.
2016-09-09 17:34:23 the redis is to be the master.


3、这时恢复主服务器,重新启动Redis与KeepAlived

systemctl start redis.service systemctl start keepalived.service

通过客户端 INFO 命令查看状态,可以看到原来的主,现在变成了备份服务器。又变成了新一轮的主备模式。 KeepAlived+Redis | 高可用 | 主从复制 | 健康检查 | 故障自动切换_数据_04







举报

相关推荐

0 条评论