RationalDMIS 2020 组合元素（元素定义）

组合元素的理论拖放到DMIS执行区弹出窗口增加“元素定义”功能，可以直接生成组合中包含的元素的定义语句。

$$/*  Header
DMISMN/'Created by [爱科腾瑞科技(北京)有限公司-091521-DEMO-11022(华清)] on 星期三, 六月 23, 2021', 4.0
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.0000
MODE/MAN
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, 20.0000
RECALL/D(MCS)
SNSLCT/S(40-D2)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, DEFALT
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
$$*/
MODE/PROG,MAN
F(CIR1)=FEAT/CIRCLE,INNER,CART,15.9115,22.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(CIR2)=FEAT/CIRCLE,INNER,CART,47.0885,22.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(CIR3)=FEAT/CIRCLE,INNER,CART,31.5000,49.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
 
$$ Measurement points are created through nominal points
MEAS/CIRCLE, F(CIR1), 4
  PTMEAS/CART, 13.7233, 18.0043, -3.0000,  0.4376,  0.8991, 0.0000
  PTMEAS/CART, 20.4073, 20.3118, -3.0000, -0.8991,  0.4376, 0.0000
  PTMEAS/CART, 18.0997, 26.9957, -3.0000, -0.4376, -0.8991, 0.0000
  PTMEAS/CART, 11.4158, 24.6882, -3.0000,  0.8991, -0.4376, 0.0000
ENDMES
$$ Measurement points are created through nominal points
MEAS/CIRCLE, F(CIR2), 4
  PTMEAS/CART, 42.7727, 19.9752, -3.0000,  0.8631,  0.5050, 0.0000
  PTMEAS/CART, 49.6132, 18.1843, -3.0000, -0.5050,  0.8631, 0.0000
  PTMEAS/CART, 51.4042, 25.0248, -3.0000, -0.8631, -0.5050, 0.0000
  PTMEAS/CART, 44.5637, 26.8157, -3.0000,  0.5050, -0.8631, 0.0000
ENDMES
$$ Measurement points are created through nominal points
MEAS/CIRCLE, F(CIR3), 4
  PTMEAS/CART, 29.1471, 45.0882, -3.0000,  0.4706,  0.8824, 0.0000
  PTMEAS/CART, 35.9118, 47.1471, -3.0000, -0.8824,  0.4706, 0.0000
  PTMEAS/CART, 33.8529, 53.9118, -3.0000, -0.4706, -0.8824, 0.0000
  PTMEAS/CART, 27.0882, 51.8529, -3.0000,  0.8824, -0.4706, 0.0000
ENDMES
F(PATERN1)=FEAT/PATERN,F(CIR1),F(CIR2),F(CIR3)
 
F(CIR1)=FEAT/CIRCLE,INNER,CART,15.9115,22.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(CIR2)=FEAT/CIRCLE,INNER,CART,47.0885,22.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(CIR3)=FEAT/CIRCLE,INNER,CART,31.5000,49.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000