从vmware中获取的自动扩容磁盘脚本
#!/bin/bash
#
# Copyright 2016-2020 VMware, Inc. All rights reserved.
#
# autogrow Grow all partitions to 100%
# /usr/lib/applmgmt/support/scripts/resize-root.py
. /usr/sbin/disk_utils.sh
lvm_autogrow
# Resize swap partition at boot
tlog() {
echo `date` Disk Util: "$@"
}
# Following routine resizes all PVs in LVM called by resize_lvm_vg
resize_lvm_pv()
{
# Add a force rescan of scsi bus to allow hotadd changed disk size
# Note the following command is SuSE / SLES specific
tlog "INFO: Scanning Hard disk sizes"
rescan-scsi-bus.sh -w --forcerescan 2>&1
# Now resize all LVM PVs
local DEVLIST=`ls /sys/block/ | grep sd[a-z]`
for d in $DEVLIST; do
local DEV=/dev/${d}
# check for partitions, filesystem, swap directly on the device and LVM.
tlog "INFO: Resizing PV $DEV"
if file -s $DEV | grep -q "LVM2"; then
pvresize $DEV 2>&1
fi
done
}
# Following routine resizes all VGs
resize_lvm_vg()
{
local VGLIST=`lvdisplay | grep "LV Path"|awk '{print $3}'`
# Call resize PVs (Doesn't hurt if called multiple times)
resize_lvm_pv
# Now resize all LVM LVs
for v in $VGLIST; do
tlog "INFO: LV Resizing $v"
lvresize --resizefs -l +100%FREE "$v" 2>&1
done
return 0
}
#
# lists the next device that don't contain partitions, filesystems or LVM data.
#
get_next_uninitialized_device()
{
DISKFILE=$1
lockfile /tmp/disk.create.lockfile
local __resultvar=$1
local DEVLIST=`ls /sys/block/ | grep sd[a-z]`
for d in $DEVLIST; do
local DEV=/dev/${d}
# check for partitions, filesystem, swap directly on the device and LVM.
if ! file -s $DEV | grep -q "partition [[:digit:]]\+:\|filesystem data\|LVM2\|swap file\|GPT\|MBR"; then
if ! grep -q $DEV $DISKFILE; then
echo $DEV >> $DISKFILE
echo $DEV
rm -f /tmp/disk.create.lockfile
return
fi
fi
done
rm -f /tmp/disk.create.lockfile
echo ""
}
create_vg_lg()
{
local VG_NAME="$1"
local newdisk="$2"
local LV_NAME="$3"
local LV_FSTYPE="$4"
local LV_MOUNTPOINT="$5"
local LV_OPTS="$6"
tlog "INFO: $VG_NAME on $newdisk setup started"
set_vg "$VG_NAME" "$newdisk" || (tlog "LVM:VG $VG_NAME not created on $newdisk"; return 1)
set_lv "$VG_NAME" "$LV_NAME" "$LV_FSTYPE" "$LV_MOUNTPOINT"\
"$LV_OPTS" || (tlog "LVM:LV $VG_NAME not created"; return 1)
tlog "INFO: $VG_NAME on $newdisk setup completed"
return 0
}
set_vg()
{
local VG_NAME="$1"
local newdisk="$2"
if [ "$newdisk" != "" ]; then
vgcreate -s 8m -l 8 -f "$VG_NAME" "$newdisk" 2>&1 >/dev/null \
|| (tlog "ERROR:VG $VG_NAME could not be created"; return 1)
else
tlog "WARN No disk available for creating vg $VGNAME"
return 1
fi
return 0
}
set_lv()
{
local VG_NAME="$1"
local LV_NAME="$2"
local LV_FSTYPE="$3"
local LV_MOUNTPOINT="$4"
local LV_OPTS="$5"
lvcreate -l "100%FREE" -n "$LV_NAME" "$VG_NAME" 2>&1 > /dev/null
if [ $? -ne 0 ]; then
tlog "ERROR: Cannot create LV $LV_NAME."
return 1
fi
if [ "${LV_FSTYPE}" == "swap" ]
then
# We do mkswap in recreate_swap function
# grep for whole word here to be more accurate
if ! (grep -qw "${VG_NAME}/${LV_NAME}" /etc/fstab); then
echo "/dev/${VG_NAME}/${LV_NAME} none ${LV_FSTYPE} sw,nosuid,nodev 0 0" >> /etc/fstab
fi
return 0
fi
FSOPT=""
if [ "${LV_FSTYPE}" == "ext3" ]
then
FSOPT="-q"
fi
if ! mkfs."$LV_FSTYPE" $FSOPT "/dev/$VG_NAME/$LV_NAME" 2>&1 > /dev/null; then
tlog "ERROR: Cannot create a filesystem on /dev/$VG_NAME/$LV_NAME."
return 1
fi
return 0
}
# The following should be called early in boot cycle to resize swap
# It is not expected that lvm autogrow may be executed everytime so
# it does resize swap logical volume (firstboot)
recreate_swap()
{
local DEV_SWAP=/dev/sdc
local VG_SWAP=swap_vg
local LV_SWAP=swap1
local LV_FSTYPE=swap
local LV_SWAP_MAPPER=/dev/mapper/${VG_SWAP}-${LV_SWAP}
# The disk might be blank disk might need to recreate swap_vg
# exit if it fails with return value 1
tlog "INFO: Recreating swap"
vgexists=`pvs 2>/dev/null | awk "/[[:space:]]${VG_SWAP}[[:space:]]/{print \$1}"`
if [ "$vgexists" == "" ]; then
set_vg "${VG_SWAP}" "$DEV_SWAP" || (tlog "SWAP:VG $VG_SWAP not created on $DEV_SWAP"; return 1)
set_lv "${VG_SWAP}" "${LV_SWAP}" "${LV_FSTYPE}" || (tlog "SWAP:LV $LV_SWAP not created"; return 1)
fi
# Also we need to make sure that the swap partition is resized
# If there is no change it errors out keeping the old swapon
pvresize "$DEV_SWAP" || (tlog " pvresize swap failed"; return 1)
lvresize -l +100%FREE "/dev/${VG_SWAP}/${LV_SWAP}" 2>&1 > /dev/null \
|| (tlog " Swap resize not needed"; return 0)
# Now swapoff and swapon the device to utilize full size
# Best done after reboot - early in boot cycle
# otherwise swapoff may fail
if (/sbin/swapon -s | grep -q "${LV_SWAP_MAPPER}"); then
/sbin/swapoff "${LV_SWAP_MAPPER}" || (tlog "SWAP:swapoff failed"; return 1)
fi
/sbin/mkswap -f "${LV_SWAP_MAPPER}" || (tlog "SWAP:mkswap failed"; return 1)
/sbin/swapon "${LV_SWAP_MAPPER}" || (tlog "SWAP:swapon failed"; return 1)
tlog "INFO: Swap resizing done"
return 0
}
#
# lists the PVs for a given VG.
# used during firstboot. it's expected that the PVs are at the disk level, not partitions.
#
get_devices_for_vg()
{
local VG_NAME=$1
pvs | awk "/[[:space:]]${VG_NAME}[[:space:]]/{print \$1}"
}
#
# guesses the name of the lv that resides on device.
#
get_lv_for_device()
{
local DEV=$1
local VG_NAME=`pvs | grep "$DEV" | head -1 | awk '{print $2}'`
# the LV name should be the VG without _vg suffix
echo ${VG_NAME/%_vg/}
}
#
# creates several per-disk VGs, based on configuration file,
# and one LV in each VG.
# the disks come pre-initialized with a VG, used only as a tag
# to distinguish between them.
#
# New setup is as follows
# CloudVM has few disks populated
# 1. sda- system/root,
# 2. sdb - CloudComponents/RPM packages,
# 3. sdc - swap disk
# All other disks are assumed to be blank (either a blank vmdk or a
# dynamic disk). File systems are assigned to disks in the order they appear
# in cloudvm_disk.cfg. Because cloudvm_disk.cfg is used both to created the
# disks in the OVF and to assign them (here), this mapping is not fragile.
#
setup_storage()
{
local DISK_CFG=$1
local failed=0
if ! grep -q "^LV_CFG=" "$DISK_CFG"; then
tlog "ERROR: LV_CFG not found."
return 1
fi
if vgdisplay 2>&1 | grep -q "VG Name[[:space:]]*$VG_NAME\$"; then
tlog "WARNING: Volume group $VG_NAME already exists."
return 0
fi
echo >> /etc/fstab
DISKFILE=$(mktemp '/tmp/XXXXdisk.reserved') ||\
{ echo "Failed to create XXXXdisk.reserved"; exit 1; }
grep "^LV_CFG=" "$DISK_CFG" | ( while read line; do
LV_CFG=$(echo $line | cut -f2 -d=)
set -- $LV_CFG
# see http://tldp.org/LDP/abs/html/gotchas.html#BADREAD0
LV_NAME=$1; LV_MOUNTPOINT=$2; LV_FSTYPE=$3; LV_OPTS=$5
VG_NAME=${LV_NAME}_vg
if [[ "$LV_NAME" == "lvm_snapshot" ]]; then
echo "Switching VG format for $LV_NAME"
snapshot_lvname=lv_${LV_NAME}
snapshot_vgname=vg_${LV_NAME}
LV_NAME=$snapshot_lvname
VG_NAME=$snapshot_vgname
fi
echo "Creating disk with VG $VG_NAME, LV $LV_NAME"
local newdisk=`get_next_uninitialized_device $DISKFILE`
# create_vg_lg used to executed in parallel, refer to PR 1585511 & 1608127
create_vg_lg "$VG_NAME" "$newdisk" "$LV_NAME" "$LV_FSTYPE" \
"$LV_MOUNTPOINT" "$LV_OPTS"
if ! mkdir -p "$LV_MOUNTPOINT" 2>&1 > /dev/null; then
tlog "ERROR: Cannot create mountpoint $LV_MOUNTPOINT."
failed=1
elif ! (grep -qw "${VG_NAME}/${LV_NAME}" /etc/fstab); then
echo "/dev/$VG_NAME/$LV_NAME $LV_MOUNTPOINT $LV_FSTYPE $LV_OPTS 0 2" >> /etc/fstab
fi
done
rm -f $DISKFILE
if [ "$failed" -eq "1" ]; then
return 1
fi
)
tlog "INFO: All filesystems created. Mounting all"
if ! mount -a; then
tlog "ERROR: Cannot mount all filesystems."
return 1
fi
}
#
# expands LVs into new disk free space.
#
lvm_autogrow()
{
# we don't handle brand new disks
# The user has to manually do vgcreate
# or vgextend to add it to existing VG
# For existing VGs just call resize_lvm_vg
resize_lvm_vg
return $?
}
