图形视图-自动功能设置-自动显示CRD
如果选中"进行显示CRD"一项,在坐标系数据区中选中某个坐标系时会相应的在图形窗口中闪烁显示选中的坐标系,方便用户查看坐标系的情况.
$$/* Header
DMISMN/'Created by [爱科腾瑞科技(北京)有限公司-091521-DEMO-11022(华清)] on 星期四, 六月 24, 2021', 4.0
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.0000
MODE/MAN
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, 20.0000
RECALL/D(MCS)
SNSLCT/S(40-D2)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, DEFALT
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
$$*/
MODE/MAN
F(PLN1)=FEAT/PLANE,CART,31.7266,36.3026,0.0000,0.0000,0.0000,1.0000
$$ Measurement points are created through nominal points
MEAS/PLANE, F(PLN1), 4
PTMEAS/CART, 3.6493, 55.3597, 0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 3.7088, 9.4528, 0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 58.1470, 7.4620, 0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 61.4015, 72.9360, 0.0000, 0.0000, 0.0000, 1.0000
ENDMES
F(LN1)=FEAT/LINE,BND,CART,5.2857,0.0000,-2.2492,62.1995,0.0000,-2.5711,0.0000,-1.0000,0.0000
$$ Measurement points are created through nominal points
MEAS/LINE, F(LN1), 2
PTMEAS/CART, 5.2857, 0.0000, -2.2492, -0.0000, -1.0000, -0.0000
PTMEAS/CART, 62.1995, 0.0000, -2.5711, -0.0000, -1.0000, -0.0000
ENDMES
F(CIR1)=FEAT/CIRCLE,INNER,CART,31.5000,31.5000,-1.7461,0.0000,0.0000,1.0000, 20.0000
$$ Measurement points are created through nominal points
MEAS/CIRCLE, F(CIR1), 4
PTMEAS/CART, 27.9714, 40.8568, -1.6075, 0.3529, -0.9357, 0.0000
PTMEAS/CART, 41.4307, 32.6751, -1.8687, -0.9931, -0.1175, 0.0000
PTMEAS/CART, 32.4729, 21.5474, -1.6723, -0.0973, 0.9953, 0.0000
PTMEAS/CART, 22.0160, 28.3291, -1.8361, 0.9484, 0.3171, 0.0000
ENDMES
D(CRD1) = DATSET/FA(PLN1), ZDIR, ZORIG, FA(LN1), XDIR, FA(CIR1), XORIG
D(CRD1) = TRANS/ZORIG, -0, YORIG, FA(CIR1), XORIG, -0
